Extreme Networks BlackDiamond 8810 - G48 Xc I;O Module

BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
42
G48Xc I/O Module
The G48Xc I/O module (Figure 24) has 48 unpopulated SFP-based 1-gigabit Ethernet ports.
Figure 24: G48Xc I/O Module
In the default configuration of the G48Xc I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The G48Xc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the G48Xc I/O module, see “I/O Module LEDs”
on page 50.
Module status LEDs
ASP049A
1000BASE-X
ports