BlackDiamond 8800 Series Switches Hardware Installation Guide
51
Module LEDs
Table 10 describes the LED activity for all I/O modules that are installed in BlackDiamond 8800
series switches.
Port LEDs on Non-PoE Modules
This section describes the port LEDs for non-PoE BlackDiamond 8000 series I/O modules and for port
option cards installed in the MSM-8c. These include the following modules and option cards:
Table 11 describes the LED meanings for each port on the non-PoE BlackDiamond 8000 series I/O
modules and the port option cards for the MSM-8c.
Table 10: LED Meanings in I/O Modules for BlackDiamond 8800 Series Switches
LED Color Indicates
PoE
Present
Amber The optional PoE card is installed on the module but is malfunctioning.
Green The optional PoE card is installed on the module and is active.
Off No optional PoE card is installed.
This LED is present only on the G48Tc, G48Te2, 8500-G48T-e, and 8900-G48T-xl modules.
Status Green blinking Normal operation
Amber blinking Configuration error, code version error, diagnostic failure, or other severe
module error
Off No power
DIAG Off Normal operation
Amber blinking Diagnostics in progress
Amber Diagnostic failure
● G24X ● 10G8Xc
● G48T ● G48Te
● 10G4X ● G48Te2 (without S-POE card)
● G48Ta ● 8500-G24X-e
● G48Xa ● 8500-G48T-e (without S-POE card)
● 10G4Xa ● 8900-10G24X-c
● 10G4Ca ● 8900-G96T-c
● G48Tc (without S-POE card) ● 8900-G48T-xl (without S-POE card)
● G24Xc ● S-10G1Xc option card
● G48Xc ● S-G8Xc option card
● 10G4Xc
Table 11: Port LEDs for the BlackDiamond 8000 Series Non-PoE I/O Modules and
Port Option Cards
LED Color Indicates
Port Solid green Link up
Slow green blinking Port disabled
Amber blinking Activity
Off Link down
To Next Page
Loading...
