Extreme Networks ExtremeSwitching 5420 Series Installation Guide

Safety and Regulatory Information
Considerations Before Installing on page 114
General Safety Precautions on page 114
Maintenance Safety on page 115
Fiber Optic Ports and Optical Safety on page 115
Cable Routing for LAN Systems on page 116
Install Power Supply Units and Connect Power on page 117
Selecting Power Supply Cords on page 118
Battery Notice on page 118
Battery Warning - Taiwan on page 119
EMC Warnings on page 119
Japan (VCCI Class A) on page 120
Korea EMC Statement on page 120
Warning
Read the following safety information thoroughly before installing Extreme
Networks products. Failure to follow this safety information can lead to
personal injury or damage to the equipment.
Only trained and qualied service personnel (as dened in IEC 60950-1 and AS/NZS
3260) should install, replace, or perform service to Extreme Networks switches and their
components. Qualied personnel have read all related installation manuals, have the
technical training and experience necessary to be aware of the hazards to which they
are exposed in performing a task, and are aware of measures to minimize the danger to
themselves or other persons.
If you are located in the United States, install the system in accordance with the U.S.
National Electrical Code (NEC).
ExtremeSwitching 5420 Series Hardware Installation Guide 113

Extreme Networks ExtremeSwitching 5420 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 5420 Series
Category	Switch
Language	English