To Next Page

To Previous Page

For FabricEngine licensing, see the Licensing chapter in the

Fabric Engine User Guide

for your version of the FabricEngine operating system.

For XIQ licensing, see

ExtremeCloud IQ

5420F-8W-16P-4XE Switch Features

The front panel of the 5420F-8W-16P-4XE switch includes:

• 8 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with

802.3bt Type 4 PoE (90W).

Note

Half-duplex is not supported on these ports when operating at 1Gbps.

• 16 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type

2 PoE+ (30W) ports

• 4 1/10Gb SFP+ MACsec capable uplink ports (unpopulated)

• 2 Stacking/SFP-DD ports (unpopulated)

• 1 Serial console port (RJ-45)

• 1 10/100/1000BASE-T out-of-band management port

• 2 USB Type-A ports for management or external ash

• 1 USB Micro-B console port

Figure 1: 5420F-8W-16P-4XE Front Panel

1 = 10/100/1000BASE-T ports

4 = 10/100/1000BASE-T out-of-band

management port

7 = SFP-DD

stacking ports

2 = Mode button 5 = RJ-45 serial console port 8 = 1/10G SFP+

ports

3 = USB Micro-B console port 6 = USB Type-A ports

The rear panel of the switch includes:

• 2 xed fan modules

• Grounding lug

• 1 AC power inlet connector

• 1 power supply slot

5420F-8W-16P-4XE Switch Features ExtremeSwitching 5420 Series Overview

16 ExtremeSwitching 5420 Series Hardware Installation Guide

Extreme Networks ExtremeSwitching 5420 Series Installation Guide

Other manuals for Extreme Networks ExtremeSwitching 5420 Series