Extreme Networks ExtremeSwitching 5420 Series Installation Guide

Figure 14: 5420F-48P-4XE Rear Panel
1 = Grounding lug 3 = AC power inlet connector
2 = Fixed fan modules 4 = Power supply slot
5420F-48P-4XL Switch Features
The front panel of the 5420F-48P-4XL switch includes:
• 48 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type
2 PoE+ (30W).
Note
Half-duplex is not supported on these ports when operating at 1Gbps.
• 4 10Gb SFP+ MACsec capable LRM capable uplink ports (unpopulated)
• 2 Stacking/SFP-DD ports (unpopulated)
• 1 Serial console port (RJ-45)
• 1 10/100/1000BASE-T out-of-band management port
• 2 USB Type-A ports for management or external ash
• 1 USB Micro-B console port
Figure 15: 5420F-48P-4XL Front Panel
1 = 10/100/1000BASE-T ports
4 = 10/100/1000BASE-T out-of-
band management port
7 = SFP-DD stacking
ports
2 = Mode button 5 = RJ-45 serial console port 8 = 10G SFP+ LRM
and MACsec capable
ports
3 = USB Micro-B console port 6 = USB Type-A ports
5420F-48P-4XL Switch Features ExtremeSwitching 5420 Series Overview
24 ExtremeSwitching 5420 Series Hardware Installation Guide

Extreme Networks ExtremeSwitching 5420 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 5420 Series
Category	Switch
Language	English