Figure 21: 5420M-24W-4YE Front Panel
1 = 10/100/1000BASE-T ports 4 = 10/100/1000BASE-T out-of-band
management port
7 = SFP-DD
stacking ports
2 = Mode button 5 = RJ-45 serial console port 8 = 1/10/25G SFP28
ports
3 = USB Micro-B console port 6 = USB Type-A ports
The rear panel of the switch includes:
• 1 fan module
• Grounding lug
• 2 power supply slots
Figure 22: 5420M-24W-4YE Rear Panel
1 = Grounding lug
3 = Power supply slots
2 = Fan module
5420M-16MW-32P-4YE Switch Features
The front panel of the 5420M-16MW-32P-4YE switch includes:
• 16 100Mb/1Gb/2.5Gb MACsec cabable ports with 802.3bt Type 4 PoE (90W)
Note
Half-duplex is not supported on these ports when operating at 1Gbps.
• 32 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type
2 PoE+ (30W)
• 4 1/10/25Gb SFP28 MACsec capable uplink ports (unpopulated)
5420M-16MW-32P-4YE Switch Features ExtremeSwitching 5420 Series Overview
28 ExtremeSwitching 5420 Series Hardware Installation Guide
To Next Page
Loading...
Need help?
General
