Fagor CNC 8055i FL EN - Page 191

Installation manual
CNC 8055
CNC 8055i
MACHINE PARAMETERS
6.
SOFT: V02.2X
·191·
General machine parameters
COCYZ (P155) 0000 0000 0100 0110
It hides the tapping, drilling 2 and drilling 3 cycles.
COCYF5 (P152) 0000 0000 0000 0010
It hides the 3D profile pocket cycle.
COCYF1 (P148) 0000 0000 0000 0010
It hides the PROBE 1 cycle.
Meaning of the parameters in the MC work mode.
Parameter Operations or cycles
COCYF1 Probe 1
(Bit 1)
Probe calibration
(Bit 3)
COCYF2
COCYF3 Profile milling 1
(Bit 0)
Profile milling 2
(Bit 1)
COCYF4 Random
(Bit 0)
Grooving
(Bit 1)
COCYF5 Pocket with 2D profile
(Bit 0)
Pocket with 3D profile
(Bit 1)
COCYF6 Rectangular boss
(Bit 0)
Circular boss
(Bit 1)
COCYF7 Rectangular pocket 1
(Bit 0)
Rectangular pocket 2
(Bit 1)
Circular pocket 1
(Bit 2)
Circular pocket 2
(Bit 3)
COCYZ Drilling 1
(Bit 0)
Thread milling
(Bit 4)
Boring 1
(Bit 11)
Drilling 2
(Bit 1)
Threading
(Bit 6)
Boring 2
(Bit 12)
Drilling 3
(Bit 2)
Bore milling
(Bit 7)
Drilling 4
(Bit 3)
Reaming
(Bit 9)
COCYPOS Positioning 1
(Bit 0)
Positioning 2
(Bit 1)
COCYPROF
COCYGROO
Parameter Multiple positioning ...
COCYZPOS .... at several points
(Bit 0)
... in grid pattern
(Bit 11)
... in line
(Bit 3)
... in parallelogram
(Bit 12)
... in arc
(Bit 6)
... in polar arc
(Bit 7)