·572·
Installation manual
CNC 8055
CNC 8055i
13.
ACCESS TO INTERNAL CNC VARIABLES
SOFT: V02.2X
Other variables
CYCEDI
Variable that may be read from CNC, PLC and DNC that indicates (on the conversational model)
the cycle or screen number according to the following list:
Screen CYCEDI
Standard screen 100
Auxiliary screen 101
Cycle (milling model ·MC·) CYCEDI Cycle (lathe model ·TC·) CYCEDI
Multiple positioning in several locations 1 Rounding cycle 1 1
Multiple positioning in a straight line 2 Rounding cycle 2 2
Multiple positioning in an arc 1 3 Turning cycle 1 3
Multiple positioning in a rectangular pattern 4 Facing cycle 1 4
Multiple positioning in a grid pattern 5 Taper cycle 1 5
Multiple positioning in an arc 2 6 Taper cycle 2 6
Surface milling cycle 7 Threading cycle 1 7
Rectangular boss cycle 8 Threading cycle 2 8
Circular boss cycle 9 Threading cycle 3 9
Profile milling cycle 1 10 Profiling cycle 1 10
Profile milling cycle 2 11 Profiling cycle 2 11
Circular pocket cycle 1 12 Grooving cycle 1 12
Positioning cycle 1 13 Positioning cycle 1 13
Drilling cycle 1 14 Drilling cycle 14
Drilling cycle 2 15 Tapping cycle 15
Simple pocket cycle 16 Grooving cycle 2 16
Positioning cycle 2 17 Positioning cycle 2 17
Pocket cycle with a 2D profile 18 Grooving cycle 3 18
Pocket cycle with a 3D profile 19 Grooving cycle 4 19
Center punching cycle 20 Multiple drilling cycle 20
Threading cycle 21 Multiple threading cycle 21
Reaming cycle 22 Multiple slot milling cycle 22
Boring cycle 1 23 Thread repair cycle 23
ISO block editing cycle 24 ISO block editing cycle 24
Rectangular pocket cycle 25 ZC profiling cycle 25
Circular pocket cycle 2 26 XC profiling cycle 26
Drilling cycle 3 27 Taper cycle 3 27
Grooving cycle 28 Turning cycle 2 28
Boring cycle 2 29 Cut-off cycle 29
Probe 1 cycle 30 Multiple-entry (multi-start) threading cycle 30
Cycle of zero offsets and presets 31 Facing cycle 2 31
Cycle of work sets 32 Probe 1 cycle 32
Cycle of labels and jumps 33 Probe 2 cycle 33
Mirror image cycle 34 Zero offset cycle 34
To Next Page
Loading...
