·676·
Installation manual
CNC 8055
CNC 8055i
H.
SOFT: V02.2X
Summary of PLC inputs and outputs
Logic outputs of the auxiliary spindle
Auxiliary M, S, T function transfer.
Logic outputs of key status.
DRSTAFAS M5557 With Sercos. They indicate servo drive status.
DRSTASAS M5556
MBCD1 R550 Auxiliary M function to be executed in the main channel.
MBCD2 R551 Auxiliary M function to be executed in the main channel.
MBCD3 R552 Auxiliary M function to be executed in the main channel.
MBCD4 R553 Auxiliary M function to be executed in the main channel.
MBCD5 R554 Auxiliary M function to be executed in the main channel.
MBCD6 R555 Auxiliary M function to be executed in the main channel.
MBCD7 R556 Auxiliary M function to be executed in the main channel.
MBCDP1 R565 Auxiliary M function to be executed in the PLC channel.
MBCDP2 R566 Auxiliary M function to be executed in the PLC channel.
MBCDP3 R567 Auxiliary M function to be executed in the PLC channel.
MBCDP4 R568 Auxiliary M function to be executed in the PLC channel.
MBCDP5 R569 Auxiliary M function to be executed in the PLC channel.
MBCDP6 R570 Auxiliary M function to be executed in the PLC channel.
MBCDP7 R571 Auxiliary M function to be executed in the PLC channel.
SBCD R557 Spindle speed in BCD (2 or 8 digits).
TBCD R558 Indicates the magazine position of the tool to be placed in the spindle.
T2BCD R559 Magazine position (pocket) for the tool.
KEYBD1 R560 Indicate whether a key of the operator panel is pressed.
KEYBD2 R561
KEYBD3 R562
KEYBD4 R563
To Next Page
Loading...
