Installation manual
CNC 8055
CNC 8055i
CNC 8055 I CONFIGURATION
2.
SOFT: V02.2X
·89·
CNC structure
Conectores X10, X11, X12, X13 - Feedback inputs for the axes
X10 For feedback connection of the first axis.
X11 For feedback connection of the second axis.
X12 For feedback connection of the third axis.
X13 For feedback connection of the fourth axis.
15-pin high density SUB-D type female connectors.
Admits differential TTL and 1Vpp sinusoidal feedback.
The cable shield must be connected to the metallic hood at each end.
Protection at the connectors
It detects over-current or short-circuits at the feedback devices issuing the relevant error message.
"Supply voltage error on axis feedback *".
Pin Signal and function
1
2
3
4
5
6
7
8
A
/A
B
/B
I0
/I0
- - -
- - -
Feedback signals.
9
10
11
12
13
14
15
+5 V
+5 V
11
11
100P
- - -
Chassis
Voltage supply for the feedback system.
Shield
To Next Page
Loading...
