·90·
Installation manual
CNC 8055
CNC 8055i
2.
CNC 8055 I CONFIGURATION
SOFT: V02.2X
CNC structure
Slot "COMPACT FLASH" - Compartment of the KeyCF (CNC configuration card)
The COMPACT FLASH slot is located on the left side of the CNC. This slot is used for the KeyCF
and for upgrading software versions.
The KeyCF supplied by Fagor with each CNC has an identification code corresponding to:
• The card id (all the cards are different).
• The software features that have been purchased for that unit
The id code only needs very little memory space. The rest of memory space of the KeyCF may be
used to store data on machine customizing (user screens, PLC program backup and/or machine
parameters, etc.) as well as user part-programs.
The CNC will recognize the KeyCF as <Hard Disk>, it can also be accessed from the CNC.
Slot "COMPACT FLASH".
Compartment of the KeyCF (CNC configuration
card).
To Next Page
Loading...
