·170·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for JOG mode.
• They are defined with the "+" and "-" values for the keys that only define the moving
direction.
• They are defined with the "R" value for the rapid key.
The user keys defined this way behave like the jog keys whether they've been defined signed
or unsigned and also respect the setting of machine parameter JOGTYPE.
HBLS PORTABLE OPERATOR PANEL.
HBLS
Activate the portable operator panel HBLS.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPMAN.HBLS
This parameter indicates whether there is a portable panel HBLS connected to the CNC
through the serial line or not. In order to be able to use the portable operator panel HBLS,
the serial line must be configured as RS422 (parameter RSTYPE). The portable operator
panel HBLS must not be considered when counting the handwheels of the system
(parameter NMPG).
To Next Page
Loading...
