·212·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for HMI (Interface).
FUNCTION
Function associated with the escape key.
Possible values: Previous menu / Previous component / Previous menu-component.
Default value: Previous menu.
Parameter included in the ESCAPEKEY table.
In this parameter is possible to choose between showing the previous softkey-menu, the
previous work mode or both. If "both" is selected, every time this key is pressed, it will show
the previous softkey menu until reaching the main menu. From then on, the work mode will
change.
NPREVIOUS
Maximum number of previous components stored.
Possible values: From 1 to 5.
Default value: 1.
Parameter included in the ESCAPEKEY table.
Number of components stored by the CNC to be displayed when pressing the escape key.
SIMULATED JOG KEYBOARD.
SIMJOGPANEL
Simulated JOG panel.
Possible values: Yes / No.
Default value: No.
This parameter indicates whether the simulated panel is available or not. To select or deselect
it, press [CTRL] + [J].
A simulated jog keyboard is a window that lays over the CNC screen and may be used to
simulated the jog keys and the keys for accessing the work modes. It may have to be used
when working with telediagnosis (remote control of the CNC).
CNC SHUT DOWN.
WINEXIT
Exit Windows when closing the CNC.
Possible values: Yes / No.
Default value: No (Windows is not closed).
This parameter indicates whether Windows is closed or not when exiting the CNC using [ALT]
+ [F4].
GRAPHICS CONFIGURATION.
GRAPHTYPE
List of graphics in each channel.
On the lathe model, this parameter shows the table to define the configuration of the graphics
in each channel.
GRAPHTYPECH n
Type of graphics in each channel.
Possible values: Horizaontal or vertical lathe; X+ Z+ / X- Z+ / X+ Z- / X- Z-.
Default value: Horizontal X+ Z+.
Parameter included in the GRAPHTYPE table.
In the lathe model, this parameter sets the configuration of the graphics of the channel.
GRAPHTYPE
GRAPHTYPECH n Type of graphics in each channel.
To Next Page
Loading...
