Fagor CNC 8060 - Page 274

·274·
Installation manual
CNC 8060
CNC 8065
4.
PLC PROGRAMMING.
(REF: 1402)
Summary programming commands.
= SBS Substract.
= MLS Multiplication.
= DVS Division.
= MDS Module or remainder of a division.
• Logic action instructions.
= AND Logic operation "AND".
= OR Logic operation "OR".
= XOR Logic operation "XOR".
= RR 1/2 Right-hand register rotation.
= RL 1/2 Left-hand register rotation.
• Specific action instructions.
= ERA Erases or resets a group of resources.
=PAR Parity of a register.
=CNCRD Reading of internal variables.
=CNCWR Writing of internal variables.
= CNCEX Execution of a CNC block.
• Action instruction of the electronic cam.
= CAM ON Activate the electronic cam (real coordinates).
= TCAM ON Activate the electronic cam (theoretical coordinates).
= CAM OFF Cancel the electronic cam.
= CAM SELECT Selet a file cam.
= CAM DESELECT Cancel the cam of a file.
• Action instructions for independent axes. Positioning move.
= MOVE ABS Absolute positioning move.
= MOVE ADD Incremental positioning move.
= MOVE INF Infinite (endless) positioning move.
• Action instructions for independent axes. Synchronization movement.
=FOLLOW ON Activates the synchronization movement (real coordinates).
= TFOLLOW ON Activates the synchronization movement (theoretical
coordinates).
= FOLLOW OFF Cancels the synchronization movement.
• Action instructions for independent axes. Coordinate latching with the help of a probe
or a digital input.
= TOUCHPROBE Coordinate latching.