·500·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Calculation of the kinematics dimensions.
Calculation of parameter TDATA11.
First probing move.
With rotary axes B and C positioned at 0º, make a probing movement on the Z side and preset
the position Z = 0.
Second probe.
With rotary axis B positioned at 0º and the C axis at 180º, make a probing movement on the
same side. Jot down the position value (coordinate) shown at the CNC, appearing in the
drawing as ΔZ.
Mathematical calculations.
After changing the position with respect to the center of rotation ·2·, the only unknown data
after both probing movements is TDATA1.
Solution.
TDATA1 Dimensions to calculate.
OT Reference point of the tools.
ΔZ Coordinate shown by the CNC.
L Probe length.
R Probe ball radius.
O
T
2
TDATA1
Δ
Z
(-)
2
R
Y
Z
L
B=0º
C=180º
B=0º
C=0º
Y
Z
To Next Page
Loading...
