Fagor CNC 8060 - Page 501

Installation manual
CNC 8060
CNC 8065
CONCEPTS.
9.
(REF: 1402)
·501·
Calculation of the kinematics dimensions.
Calculation of parameter TDATA5.
First probing move.
With rotary axes B and C positioned at 0º, make a probing movement on the X side closest
to the origin and preset the position X = 0.
Second probe.
With rotary axis B positioned at 0º and the C axis at 180º, make a probing movement on the
same side. Jot down the position value (coordinate) shown at the CNC, appearing in the
drawing as ΔX.
Mathematical calculations.
After changing the position with respect to the center of rotation ·2·, the only unknown data
after both probing movements is TDATA5.
X
Z
X=0
1
2
B=0º
C=0º
B=0º
C=180º
Y
X
X=ΔX
2
1
2
2
TDATA5
ΔX
(-)
X
Z
X
Y
B=0º
C=180º
B=0º
C=0º
TDATA5
Solution.
TDATA5 Dimensions to calculate.
ΔX Coordinate shown by the CNC.
TDATA505,ΔZ×=