·514·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Management of several keyboards.
Configure the jog keys.
These parameters may be used to configure the jog keypad of each panel. Parameter
JOGKEYDEF corresponds to the first jog panel, JOGKEYBD2DEF to the second one and
so on.
Each parameter contains a table to define the function of each jog key. The CNC always offers
15 parameters; if the jog keypad has fewer keys, the parameters that do not have any keys
associated with them will be ignored. The relationship between these parameters and the
jog keys is the following.
The JOG keypad may consist of the following types of keys. Both types of keys may be defined
at the same JOG keypad. To define the behavior of each key, assign to them one of the
following values.
Configure the user keys as jog keys
These parameters may be used to configure the user keys of each panel as jog keys.
Parameter USERKEYDEF corresponds to the first jog panel, USERKEYBD2DEF to the
second one and so on.
Each parameter contains a table to define the function of each user key. The CNC always
offers 16 parameters; if the jog keypad has fewer keys, the parameters that do not have any
Machine parameter. Meaning.
JOGKEYDEF
JOGKEYBD2DEF
...
JOGKEYBD8DEF
Tables to configure the jog keys.
Hardware module. Jog keys.
JOG-PANEL
Keys. Meaning.
Keys to define the axis and the jogging direction.
The parameter is set with a value between -1 and +16 (signed). The sign indicates
the positive direction (+) or the negative direction (-) and the number corresponds to
the logic axis, according to parameter AXISNAME.
Keys to define the axis to be jogged.
The parameter is set with a value between 1 and 16 (unsigned) that corresponds to
the logic axis according to parameter AXISNAME.
Keys to define the direction of the movement.
The parameter is set with one of the "+" and "-" values to indicate the moving direction.
Rapid key.
The parameter is set with the "R" value.
Machine parameter. Meaning.
USERKEYDEF
USERKEYBD2DEF
...
USERKEYBD8DEF
Tables to configure the user keys as jog keys.
1
4
2
5
3
6
789
10 11 12
13 14 15
To Next Page
Loading...
