Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·563·
Variables related to the machine parameters of the channels.
(V.)[ch].MPG.HSCROUND
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Default value of the maximum path error in HSC.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.SURFFILFREQ
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Axis filter frequency (SURFACE mode).
Syntax.
·ch· Channel number.
(V.)[ch].MPG.HSCDEFAULMODE
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Default mode when programming #HSC ON.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
VIRTUAL TOOL AXIS.
(V.)[ch].MPG.VIRTAXISNAME
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Name of the virtual tool axis.
Syntax.
·ch· Channel number.
Values of the variable.
The values returned by this variable are encoded as follows.
V.[2].MPG.HSCROUND Channel ·2·.
V.[2].MPG.SURFFILFREQ Channel ·2·.
V.[2].MPG.HSCDEFAULMODE Channel ·2·.
Value. Meaning.
0 SURFACE
1 CONTERROR
2 FAST
V.[2].MPG.VIRTAXISNAME Channel ·2·.
X=10 X1=11 X2=12 X3=13 X4=14 ... X9=19
Y=20 Y1=21 Y2=22 Y3=23 Y4=24 ... Y9=29
Z=30 Z1=31 Z2=32 Z3=33 Z4=34 ... Z9=39
To Next Page
Loading...
