Fagor CNC 8060 - Page 573

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·573·
Variables related to the machine parameters of the channels.
Values of the variable.
This variable returns one of the following values.
DEFINITION OF THE SUBROUTINES.
(V.)[ch].MPG.TOOLSUB
Variable to be read via interface.
Channel [ch]. Subroutine associated with "T".
Syntax.
·ch· Channel number.
(V.)[ch].MPG.REFPSUB
Variable to be read via interface.
Channel [ch]. Subroutine associated with function G74.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.OEMSUB1
··
(V.)[ch].MPG.OEMSUB10
Variable to be read via interface.
Channel [ch]. Subroutines associated with G180 through G189.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.OEMSUB11
··
(V.)[ch].MPG.OEMSUB30
Variable to be read via interface.
Channel [ch]. Subroutines associated with G380 through G399.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.INT1SUB
··
(V.)[ch].MPG.INT4SUB
Variable to be read via interface.
Channel [ch]. Interruption subroutines.
Value. Meaning.
0No.
1Yes.
[2].MPG.TOOLSUB Channel ·2·.
[2].MPG.REFPSUB Channel ·2·.
[2].MPG.OEMSUB1 Channel ·2·.
[2].MPG.OEMSUB11 Channel ·2·.