Fagor CNC 8060 - Page 574

·574·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the machine parameters of the channels.
Syntax.
·ch· Channel number.
(V.)[ch].MPG.SUBPATH
Variable to be read via interface.
Channel [ch]. Path of the program subroutines.
Syntax.
·ch· Channel number.
TABLETOP PROBE POSITION.
(V.)[ch].MPG.PRB1MIN
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Minimum probe coordinate (abscissa axis).
Syntax.
·ch· Channel number.
(V.)[ch].MPG.PRB1MAX
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Maximum probe coordinate (abscissa axis).
Syntax.
·ch· Channel number.
(V.)[ch].MPG.PRB2MIN
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Minimum probe coordinate (ordinate axis).
Syntax.
·ch· Channel number.
(V.)[ch].MPG.PRB2MAX
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Maximum probe coordinate (ordinate axis).
Syntax.
·ch· Channel number.
[2].MPG.INT1SUB Channel ·2·.
[2].MPG.SUBPATH Channel ·2·.
V.[2].MPG.PRB1MIN Channel ·2·.
V.[2].MPG.PRB1MAX Channel ·2·.
V.[2].MPG.PRB2MIN Channel ·2·.
V.[2].MPG.PRB2MAX Channel ·2·.