·586·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
·xn· Name, logic number or index of the axis.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.LONGAXIS.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Longitudinal axis on a lathe.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
Values of the variable.
This variable returns one of the following values.
CONFIGURATION OF THE ROTARY AXES.
(V.)[ch].MPA.AXISMODE.xn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Working method with the rotary axis.
This variable indicates how the rotary axis will behave in relation to the number of turns and
position display.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA .FACEAXIS.Z Z axis.
V.MPA .FACEAXIS.4 Axis with logic number ·4·.
V.[2].MPA.FACEAXIS.1 Axis with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA .LONGAXIS.Z Z axis.
V.MPA .LONGAXIS.4 Axis with logic number ·4·.
V.[2].MPA.LONGAXIS.1 Axis with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA.AXISMODE.Z Z axis.
V.MPA.AXISMODE.4 Axis with logic number ·4·.
V.[2].MPA.A XISMODE.1 Axis with index ·1· in the channel ·2·.
To Next Page
Loading...
