Fagor CNC 8060 - Page 601

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·601·
Variables related to axis and spindle machine parameters.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.REFINI.sn
(V.)[ch].SP.REFINI.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Home search in the first movement
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
CONFIGURATION OF THE PROBING MOVEMENT.
(V.)[ch].MPA.PROBEAXIS.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. The axis can participate in probing movements.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA.DECINPUT.Z Z axis.
V.MPA.DECINPUT.S Spindle S.
V.SP.DECINPUT.S Spindle S.
V.SP.DECINPUT Master spindle.
V.MPA.DECINPUT.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DECINPUT.1 Axis with index ·1· in the channel ·2·.
V.SP.DECINPUT.2 Spindle with index ·2· in the system.
V.[2].SP.DECINPUT.1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA.REFINI.S Spindle S.
V.SP.REFINI.S Spindle S.
V.SP.REFINI Master spindle.
V.MPA.REFINI.4 Spindle with logic number ·4·.
V.SP.REFINI.2 Spindle with index ·2· in the system.
V.[2].SP.REFINI.1 Spindle with index ·1· in the channel ·2·.
V.MPA.PROBEAXIS.Z Z axis.
V.MPA.PROBEAXIS.4 Axis with logic number ·4·.
V.[2].MPA.PROBEAXIS.1 Axis with index ·1· in the channel ·2·.