Fagor CNC 8060 - Page 602

·602·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.PROBERANGE.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum braking distance.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.PROBEFEED.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum probing feedrate.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.PROBEDELAY.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Delay for the "probe 1" signal.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
Value. Meaning.
0No.
1Yes.
V.MPA .PROBERANGE.Z Z axis.
V.MPA .PROBERANGE.4 Axis with logic number ·4·.
V.[2].MPA.PROBERA NGE.1 Axis with index ·1· in the channel ·2·.
V.MPA.PROBEFEED.Z Z axis.
V.MPA.PROBEFEED.4 Axis with logic number ·4·.
V.[2].MPA.PROBEFEED.1 Axis with index ·1· in the channel ·2·.
V.MPA.PROBEDELAY.Z Z axis.
V.MPA.PROBEDELAY.4 Axis with logic number ·4·.
V.[2].MPA.PROBEDELAY.1 Axis with index ·1· in the channel ·2·.