Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·603·
Variables related to axis and spindle machine parameters.
(V.)[ch].MPA.PROBEDELAY2.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Delay for the "probe 2" signal.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
REPOSITIONING OF THE AXES IN TOOL INSPECTION.
(V.)[ch].MPA.REPOSFEED.xn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Maximum repositioning feedrate.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
CONFIGURATION OF THE INDEPENDENT AXIS.
(V.)[ch].MPA.POSFEED.xn
(V.)[ch].MPA.POSFEED.sn
(V.)[ch].SP.POSFEED.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Positioning feedrate
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.PROBEDELAY2.Z Z axis.
V.MPA.PROBEDELAY2.4 Axis with logic number ·4·.
V.[2].MPA.PROBEDELAY2.1 Axis with index ·1· in the channel ·2·.
V.MPA.REPOSFEED.Z Z axis.
V.MPA.REPOSFEED.4 Axis with logic number ·4·.
V.[2].MPA.REPOSFEED.1 Axis with index ·1· in the channel ·2·.
V.MPA.POSFEED.Z Z axis.
V.MPA.POSFEED.S Spindle S.
V.SP.POSFEED.S Spindle S.
V.SP.POSFEED Master spindle.
V.MPA.POSFEED.4 Axis or spindle with logic number ·4·.
To Next Page
Loading...
