Fagor CNC 8060 - Page 606

·606·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
JOG MODE. INCREMENTAL JOG.
(V.)[ch].MPA.INCJOGDIST[pos].xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Distance to move in incremental jog, [pos] dial position.
pos=1 for position ·1·, pos=2 for position ·10· and so on.
Syntax.
·ch· Channel number.
·pos· Position of the switch on the operator panel.
·xn· Name, logic number or index of the axis..
(V.)[ch].MPA.INCJOGFEED[pos].xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Feedrate in incremental jog, [pos] dial position.
pos=1 for position ·1·, pos=2 for position ·10· and so on.
Syntax.
·ch· Channel number.
·pos· Position of the switch on the operator panel for incremental jog.
·xn· Name, logic number or index of the axis.
JOG MODE. HANDWHEELS.
(V.)[ch].MPA.MPGRESOL[pos].xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Resolution of the handwheel, in the [pos] position.
pos=1 for position ·1·, pos=2 for position ·10· and pos=3 for ·100·.
Syntax.
·ch· Channel number.
·pos· Position of the switch on the operator panel for the handwheel mode.
·xn· Name, logic number or index of the axis.
V.MPA .INCJOG DIST[4].Z Z axis.
V.MPA .INCJOG DIST[4].4 Axis with logic number ·4·.
V.[2].MPA.INCJOGDIST[4].1 Axis with index ·1· in the channel ·2·.
V.MPA.INCJOGFEED[4].Z Z axis.
V.MPA.INCJOGFEED[4].4 Axis with logic number ·4·.
V.[2].MPA.INCJOGFEDD[4].1 Axis with index ·1· in the channel ·2·.
V.MPA.MPGRESOL[2].Z Z axis.
V.MPA.MPGRESOL[2].4 Axis with logic number ·4·.
V.[2].MPA.MPGRESOL[2].1 Axis with index ·1· in the channel ·2·.