Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·607·
Variables related to axis and spindle machine parameters.
(V.)[ch].MPA.MPGFILTER.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Filter time for the handwheel.
Syntax.
·ch· Channel number.
·pos· Position of the switch on the operator panel for the handwheel mode.
·xn· Name, logic number or index of the axis.
JOG MODE. MANUAL INTERVENTION.
(V.)[ch].MPA.MANPOSSW.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum positive travel with G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.MANNEGSW.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum negative travel with G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.MANFEEDP.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum % of jog feedrate in G201.
V.MPA.MPGFILTER[2].Z Z axis.
V.MPA.MPGFILTER[2].4 Axis with logic number ·4·.
V.[2].MPA.MPGFILTER[2].1 Axis with index ·1· in the channel ·2·.
V.MPA.MANPOSSW.Z Z axis.
V.MPA.MANPOSSW.4 Axis with logic number ·4·.
V.[2].MPA.MANPOSSW.1 Axis with index ·1· in the channel ·2·.
V.MPA.MANNEGSW.Z Z axis.
V.MPA.MANNEGSW.4 Axis with logic number ·4·.
V.[2].MPA.MANNEGSW.1 Axis with index ·1· in the channel ·2·.
To Next Page
Loading...
