Fagor CNC 8060 - Page 608

·608·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.IPOFEEDP.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum % of execution feedrate in G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.MANACCP.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum % of jog acceleration in G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.IPOACCP.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum % of execution acceleration in G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA.MANFEEDP.Z Z axis.
V.MPA.MANFEEDP.4 Axis with logic number ·4·.
V.[2].MPA.MANFEEDP.1 Axis with index ·1· in the channel ·2·.
V.MPA.IPOFEEDP.Z Z axis.
V.MPA.IPOFEEDP.4 Axis with logic number ·4·.
V.[2].MPA.IPOFEEDP.1 Axis with index ·1· in the channel ·2·.
V.MPA.MANACCP.Z Z axis.
V.MPA.MANACCP.4 Axis with logic number ·4·.
V.[2].MPA.MANACCP.1 Axis with index ·1· in the channel ·2·.
V.MPA.IPOACCP.Z Z axis.
V.MPA.IPOACCP.4 Axis with logic number ·4·.
V.[2].MPA.IPOACCP.1 Axis with index ·1· in the channel ·2·.