·62·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
General machine parameters.
MOVAXIS
Axis whose movement affects another axis (master).
Possible values: Any axes defined in AXISNAME.
Associated variable: (V.)MPG.MOVAXIS[tbl]
Parameter included in the CROSSCOMP table.
This parameter sets which is the master axis in the cross compensation.
COMPAXIS
Axis suffering the effects of the movement (compensated).
Possible values: Any axes defined in AXISNAME.
Associated variable: (V.)MPG.COMPAXIS[tbl]
Parameter included in the CROSSCOMP table.
This parameter sets which is the compensated axis in the cross compensation.
NPCROSS
Number of points in the table.
Possible values: From 0 to 1000.
Default value: 0 (there is no table).
Associated variable: (V.)MPG.NPCROSS[tbl]
Parameter included in the CROSSCOMP table.
Each cross compensation table can have up to 1000 points.
TYPCROSS
Type of compensation (type of coordinates).
Possible values: Real / Theoretical.
Default value: Real.
Associated variable: (V.)MPG.TYPCROSS[tbl]
Parameter included in the CROSSCOMP table.
This parameter determines whether the cross compensation will be applied on to theoretical
or real coordinates.
BIDIR
Bi-directional compensation.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.BIDIR[tbl]
Parameter included in the CROSSCOMP table.
This parameter indicates whether the compensation is bidirectional or not; i.e. if the
compensation is different in each direction. If the compensation is not bidirectional, it applies
the same compensation in both directions.
REFNEED
Home search required for compensation.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.REFNEED[tbl]
Parameter included in the CROSSCOMP table.
This parameter indicates whether both axes must be homed or not before applying the
compensation.
BIDIR Bi-directional compensation.
REFNEED Home search required for compensation.
DATA Table to define the compensation values.
CROSSCOMP
To Next Page
Loading...
