Fagor CNC 8060 - Page 658

·658·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
ANALOG COMMAND SETTING.
(V.)[ch].MPA.SERVOOFF[set].xn
(V.)[ch].MPA.SERVOOFF[set].sn
(V.)[ch].SP.SERVOOFF[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the environment of the oscilloscope and setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drives.
The variable returns the execution value; reading it interrupts block preparation.
Offset compensation.
The velocity command is given in D/A converter units which could be any integer within
±32767 where a value of ±32767 corresponds to ±10V.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.MINANOUT[set].xn
(V.)[ch].MPA.MINANOUT[set].sn
(V.)[ch].SP.MINANOUT[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the environment of the oscilloscope and setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drives.
The variable returns the execution value; reading it interrupts block preparation.
Minimum velocity command.
The velocity command is given in D/A converter units which could be any integer within
±32767 where a value of ±32767 corresponds to ±10V.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.SERVOOFF[3].Z Z axis.
V.MPA.SERVOOFF[3].S Spindle S.
V.SP.SERVOOFF[3].S Spindle S.
V.SP.SERVOOFF[3] Master spindle.
V.MPA.SERVOOFF[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SERVOOFF[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SERVOOFF[3].2 Spindle with index ·2· in the system.
V.[2].SP.SERVOOFF[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.MINANOUT[3].Z Z axis.
V.MPA.MINANOUT[3].S Spindle S.
V.SP.MINANOUT[3].S Spindle S.
V.SP.MINANOUT[3] Master spindle.
V.MPA.MINANOUT[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.MINANOUT[3].1 Axis with index ·1· in the channel ·2·.
V.SP.MINANOUT[3].2 Spindle with index ·2· in the system.
V.[2].SP.MINANOUT[3].1 Spindle with index ·1· in the channel ·2·.