Fagor CNC 8060 - Page 657

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·657·
Variables related to the sets of machine parameters.
Syntax.
·ch· Channel number.
·set· Parameter set.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.POLARM4[set].sn
(V.)[ch].SP.POLARM4[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Sign of the velocity command for M4.
Syntax.
·ch· Channel number.
·set· Parameter set.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
V.MPA.POLARM3[3].S Spindle S.
V.SP.POLARM3[3].S Spindle S.
V.SP.POLARM3[3] Master spindle.
V.MPA.POLARM3[3].4 Spindle with logic number ·4·.
V.SP.POLARM3[3].2 Spindle with index ·2· in the system.
V.[2].SP.POLARM3[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 Negative.
1 Positive.
V.MPA.POLARM4[3].S Spindle S.
V.SP.POLARM4[3].S Spindle S.
V.SP.POLARM4[3] Master spindle.
V.MPA.POLARM4[3].4 Spindle with logic number ·4·.
V.SP.POLARM4[3].2 Spindle with index ·2· in the system.
V.[2].SP.POLARM4[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 Negative.
1 Positive.