Fagor CNC 8060 - Page 656

·656·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
(V.)[ch].MPA.MODERR[set].xn
(V.)[ch].MPA.MODERR[set].sn
(V.)[ch].SP.MODERR[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary axes and spindles.
Variable valid for analog drives and velocity-Sercos drives.
The variable returns the execution value; reading it interrupts block preparation.
Module error. Number of increments.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
SPINDLE SPEED.
(V.)[ch].MPA.SZERO[set].sn
(V.)[ch].SP.SZERO[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for position-Sercos drives and velocity-Sercos drives.
The variable returns the value of block preparation.
Speed considered "0 rpm".
Syntax.
·ch· Channel number.
·set· Parameter set.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.POLARM3[set].sn
(V.)[ch].SP.POLARM3[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Sign of the velocity command for M3.
V.MPA.MODERR[3].Z Z axis.
V.MPA.MODERR[3].S Spindle S.
V.SP.MODERR[3].S Spindle S.
V.SP.MODERR[3] Master spindle.
V.MPA.MODERR[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.MODERR[3].1 Axis with index ·1· in the channel ·2·.
V.SP.MODERR[3].2 Spindle with index ·2· in the system.
V.[2].SP.MODERR[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.SZERO[3].S Spindle S.
V.SP.SZERO[3].S Spindle S.
V.SP.SZERO[3] Master spindle.
V.MPA.SZERO[3].4 Spindle with logic number ·4·.
V.SP.SZERO[3].2 Spindle with index ·2· in the system.
V.[2].SP.SZERO[3].1 Spindle with index ·1· in the channel ·2·.