Fagor CNC 8060 - Page 667

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·667·
Variables related to the sets of machine parameters.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.SSIDATAMODE[set].xn
(V.)[ch].MPA.SSIDATAMODE[set].sn
(V.)[ch].SP.SSIDATAMODE[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Transmission mode.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.STARTDELAY[set].xn
(V.)[ch].MPA.STARTDELAY[set].sn
(V.)[ch].SP.STARTDELAY[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Number of clocks to wait between the first down flank and the first up flank.
V.MPA.SSIALARMLEVEL[3].Z Z axis.
V.MPA.SSIALARMLEVEL[3].S Spindle S.
V.SP.SSIALARMLEVEL[3].S Spindle S.
V.SP.SSIALARMLEVEL[3] Master spindle.
V.MPA.SSIALARMLEVEL[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSIALARMLEVEL[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSIALARMLEVEL[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSIALARMLEVEL[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.SSIDATAMODE[3].Z Z axis.
V.MPA.SSIDATAMODE[3].S Spindle S.
V.SP.SSIDATAMODE[3].S Spindle S.
V.SP.SSIDATAMODE[3] Master spindle.
V.MPA.SSIDATAMODE[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSIDATAMODE[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSIDATAMODE[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSIDATAMODE[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 The LSB (Least Significant Bit) is the first one.
1 The MSB (Most Significant Bit) is the first one.