Fagor CNC 8060 - Page 668

·668·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.SSIRESOL[set].xn
(V.)[ch].MPA.SSIRESOL[set].sn
(V.)[ch].SP.SSIRESOL[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for velocity-Sercos drives.
The variable returns the value of block preparation.
Digital counting (feedback) resolution.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.STARTDELAY[3].Z Z axis.
V.MPA.STARTDELAY[3].S Spindle S.
V.SP.STARTDELAY[3].S Spindle S.
V.SP.STARTDELAY[3] Master spindle.
V.MPA.STARTDELAY[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.STARTDELAY[3].1 Axis with index ·1· in the channel ·2·.
V.SP.STARTDELAY[3].2 Spindle with index ·2· in the system.
V.[2].SP.STARTDELAY[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.SSIRESOL[3].Z Z axis.
V.MPA.SSIRESOL[3].S Spindle S.
V.SP.SSIRESOL[3].S Spindle S.
V.SP.SSIRESOL[3] Master spindle.
V.MPA.SSIRESOL[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SSIRESOL[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SSIRESOL[3].2 Spindle with index ·2· in the system.
V.[2].SP.SSIRESOL[3].1 Spindle with index ·1· in the channel ·2·.