Fagor CNC 8060 - Page 720

·720·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
PLC modifiable logic signals; general.
Values of the variable.
This variable returns one of the following values.
(V.)PLC.VOLCOMP1
··
(V.)PLC.VOLCOMP4
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC activates one of these marks, the CNC activates the corresponding volumetric
compensation.
(V.)PLC.QWERTYOFF1
··
(V.)PLC.QWERTYOFF8
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns one of these marks on, it disables the corresponding alphanumeric keyboard.
(V.)PLC.FLIMITAC
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC activates this mark, the CNC activates the feedrate safety limits (parameter
FLIMIT) on all the axes of the system.
(V.)PLC.FLIMITACCH
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC activates this mark, the CNC activates the feedrate safety limits (parameter
FLIMIT) on all the axes of the channel.
Value. Meaning.
0 Configuration defined in the machine parameters.
1 Jog panel assigned to channel 1.
2 Jog panel assigned to channel 2.
3 Jog panel assigned to channel 3.
4 Jog panel assigned to channel 4.
FF Jog panel assigned to the active channel.
V.PLC.VOLCOMP1 Volumetric compensation ·1·.
V.PLC.QWERTYOFF1 Disable keyboard ·1·.
V.PLC.QWERTYOFF2 Disable keyboard ·2·.
V.PLC.FLIMITAC
V.PLC.FLIMITAC Channel ·1·.
V.PLC.FLIMITACCH1 Channel ·1·.
V.PLC.FLIMITACCH2 Channel ·2·.
V.PLC.FLIMITACCH3 Channel ·3·.
V.PLC.FLIMITACCH4 Channel ·4·.