Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·735·
PLC modifiable logic signals; tool manager.
(V.)PLC.MZPOS
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The PLC must indicate the current magazine position in this register.
V.PLC.MZPOS Magazine ·1·.
V.PLC.MZPOSMZ1 Magazine ·1·.
V.PLC.MZPOSMZ2 Magazine ·2·.
V.PLC.MZPOSMZ3 Magazine ·3·.
V.PLC.MZPOSMZ4 Magazine ·4·.
To Next Page
Loading...
