Fagor CNC 8060 - Page 738

·738·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the machine configuration.
The logic number of the spindles is determined by the order in which they have been defined
in the machine parameter table. The logic numbering of the spindles continues from the last
logic axis; hence, in a 5-axis system, the first spindle of the table will be logic spindle ·6· and
so on.
(V.)[ch].A.ACTCH.xn
(V.)[ch].A.ACTCH.sn
(V.)[ch].SP.ACTCH.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the value of execution or preparation depending on the axis or spindle.
Current channel of the axis or of the spindle.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Remarks.
The variable returns the value of execution or preparation as follows. If the spindle belongs
to the channel requesting the variable, it returns the preparation value; if the axis or spindle
belongs to a different channel, the variable returns the execution value and interrupts block
preparation.
(V.)[ch].A.ACTIVSET.xn
(V.)[ch].A.ACTIVSET.sn
(V.)[ch].SP.ACTIVSET.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the value of execution or preparation depending on the axis or spindle.
Parameter set active at the axis or spindle.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.ACTCH.Z Z axis.
V.A.ACTCH.S Spindle S.
V.SP.ACTCH.S Spindle S.
V.SP.ACTCH Master spindle.
V.A.ACTCH.4 Axis or spindle with logic number ·4·.
V.[2].A.ACTCH.1 Axis with index ·1· in the channel ·2·.
V.SP.ACTCH.2 Spindle with index ·2· in the system.
V.[2].SP.ACTCH.1 Spindle with index ·1· in the channel ·2·.
V.A.ACTIVSET.Z Z axis.
V.A.ACTIVSET.S Spindle S.
V.SP.ACTIVSET.S Spindle S.
V.SP.ACTIVSET Master spindle.
V.A.ACTIVSET.4 Axis or spindle with logic number ·4·.
V.[2].A.ACTIVSET.1 Axis with index ·1· in the channel ·2·.
V.SP.ACTIVSET.2 Spindle with index ·2· in the system.
V.[2].SP.ACTIVSET.1 Spindle with index ·1· in the channel ·2·.