Fagor CNC 8060 - Page 739

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·739·
Variables related to the machine configuration.
Remarks.
The variable returns the value of execution or preparation as follows. If the spindle belongs
to the channel requesting the variable, it returns the preparation value; if the axis or spindle
belongs to a different channel, the variable returns the execution value and interrupts block
preparation.
CHANNELS, AXES AND SPINDLES.
(V.)G.NUMCH
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of channels.
(V.)[ch].G.AXIS
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of axes of the channel.
Syntax.
·ch· Channel number.
(V.)[ch].G.NAXIS
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of axes of the channel including the empty positions of the yielded axes.
Syntax.
·ch· Channel number.
(V.)[ch].G.NSPDL
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of spindles of the channel.
Syntax.
·ch· Channel number.
(V.)[ch].G.AXISCH
Variable to be read via interface.
Report variable (to be used from the scripts).
Axes of the system that belong to the channel.
V.G.NUMCH
V.[2].G.AXIS Channel ·2·.
V.[2].G.NAXIS Channel ·2·.
V.[2].G.NSPDL Channel ·2·.