Fagor CNC 8060 - Page 777

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·777·
Variables related to user tables (arithmetic parameters table).
(V.)[ch].G.LUP1F[nb]
(V.)[ch].G.LUP2F[nb]
(V.)[ch].G.LUP3F[nb]
(V.)[ch].G.LUP4F[nb]
(V.)[ch].G.LUP5F[nb]
(V.)[ch].G.LUP6F[nb]
(V.)[ch].G.LUP7F[nb]
Variable that can be read and written via PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of local arithmetic parameter [nb] of nesting level 1 through 7 (value x10000).
Syntax.
·ch· Channel number.
·nb· Parameter number.
Remarks.
Reading these variables from the PLC returns the parameter value multiplied by 10000. If
the value of the parameter is 54.9876, when read from the PLC, it will return the value 549876.
GLOBAL ARITHMETIC PARAMETERS.
(V.)[ch].G.GUP[nb]
Variable that can be read and written via PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of the global arithmetic parameter [nb].
Syntax.
·ch· Channel number.
·nb· Parameter number.
Remarks.
When reading this variable from the PLC, it truncates the decimal side. If the value of the
parameter is 54.9876, when read from the PLC, it will return the value 54.
[2].G.LUP1F[14] Channel ·2·. Value of parameter ·14· of nesting level ·1·.
[2].G.LUP7F[6] Channel ·2·. Value of parameter ·6· of nesting level ·7·.
Value of the parameter. Reading from the PLC.
P14 = 23.1234 G.LUP1[14] = 23
G.LUP1F[14] = 231234
P22 =-12.0987 G.LUP1[22] = -12
G.LUP1F[22] = -120987
[2].G.GUP[114] Channel ·2·. Value of parameter ·114·.
Value of the parameter. Reading the variable.
P114 = 124.4567 G.GUP[114] = 124
G.GUPF[114] = 1244567
P200 =-12.0987 G.GUP[200] = -12
G.GUPF[200] = -120987