Fagor CNC 8060 - Page 778

·778·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to user tables (arithmetic parameters table).
(V.)[ch].G.GUPF[nb]
Variable that can be read and written via PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of the global arithmetic parameter [nb] (value x10000).
Syntax.
·ch· Channel number.
·nb· Parameter number.
Remarks.
Reading these variables from the PLC returns the parameter value multiplied by 10000. If the
value of the parameter is 54.9876, when read from the PLC, it will return the value 549876.
COMMON ARITHMETIC PARAMETERS.
(V.)G.CUP[nb]
Variable that can be read and written via PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of the common arithmetic parameter [nb].
Syntax.
·nb· Parameter number.
Remarks.
When reading this variable from the PLC, it truncates the decimal side. If the value of the
parameter is 54.9876, when read from the PLC, it will return the value 54.
(V.)G.CUPF[nb]
Variable that can be read and written via PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Value of the common arithmetic parameter [nb] (value x10000).
Syntax.
·nb· Parameter number.
[2].G.GUP[114] Channel ·2·. Value of parameter ·114·.
Value of the parameter. Reading the variable.
P114 = 124.4567 G.GUP[114] = 124
G.GUPF[114] = 1244567
P200 =-12.0987 G.GUP[200] = -12
G.GUPF[200] = -120987
[2].G.CUP[10014] Channel ·2·. Value of parameter ·10014·.
Value of the parameter. Reading the variable.
P10014 = 124.4567 G.CUP[10014] = 124
G.CUPF[10014] = 1244567
P10200 =-12.0987 G.CUP[10200] = -12
G.CUPF[10200] = -120987
[2].G.CUPF[10014] Channel ·2·. Value of parameter ·10014·.