Fagor CNC 8060 - Page 779

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·779·
Variables related to user tables (arithmetic parameters table).
Remarks.
Reading these variables from the PLC returns the parameter value multiplied by 10000. If the
value of the parameter is 54.9876, when read from the PLC, it will return the value 549876.
Value of the parameter. Reading the variable.
P10014 = 124.4567 G.CUP[10014] = 124
G.CUPF[10014] = 1244567
P10200 =-12.0987 G.CUP[10200] = -12
G.CUPF[10200] = -120987