Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·801·
Variables related to spindle speed.
(V.)[ch].A.PRGCSS.sn
(V.)[ch].SP.PRGCSS.sn
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Speed active by program for G96.
Being G96 active, programming a new speed in MDI mode updates the value of this variable.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
SPINDLE SPEED IN M19.
(V.)[ch].A.SPOS.sn
(V.)[ch].SP.SPOS.sn
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Active spindle speed in M19 .
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
Remarks.
The speed may be set by program or by PLC; the one set by PLC has the highest priority.
V.A.PRGCSS.S Spindle S.
V.SP.PRGCSS.S Spindle S.
V.SP.PRGCSS Master spindle.
V.A.PRGCSS.5 Spindle with logic number ·5·.
V.SP.PRGCSS.2 Spindle with index ·2· in the system.
V.[2].SP.PRGCSS.1 Spindle with index ·1· in the channel ·2·.
V.A.SPOS.S Spindle S.
V.SP.SPOS.S Spindle S.
V.SP.SPOS Master spindle.
V.A.SPOS.5 Spindle with logic number ·5·.
V.SP.SPOS.2 Spindle with index ·2· in the system.
V.[2].SP.SPOS.1 Spindle with index ·1· in the channel ·2·.
Speed set. V.PLC.SPOS.sn V.A.PRGSPOS.sn V.A.SPOS.sn
By program; S.POS=180.
By PLC; none.
0 180 180
By program; S.POS=180.
By PLC; S.POS=250.
250 180 250
By program; S.POS=180.
By PLC; S.POS=90.
90 180 90
By program; S.POS=180.
By PLC; none.
By MDI; S.POS=200.
0 200 200
By program; S.POS=180.
By PLC; S.POS=250.
By MDI; S.POS=200.
250 200 250
By program; S.POS=180.
By PLC; S.POS=100.
By MDI; S.POS=200.
100 200 100
To Next Page
Loading...
