Fagor CNC 8060 - Page 823

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·823·
Variables associated with any tool.
Values of the variable.
This variable returns one of the following values.
(V.)TM.TLFNT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Nominal life.
Syntax.
·tl· Tool number.
·ofd· Tool offset.
(V.)TM.TLFRT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Real (actual) life.
Syntax.
·tl· Tool number.
·ofd· Tool offset.
"CUSTOM" DATA OF THE TOOL.
(V.)TM.TOTP1T[tl]
(V.)TM.TOTP2T[tl]
(V.)TM.TOTP3T[tl]
(V.)TM.TOTP4T[tl]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
Tool [tl]. Custom parameters.
Syntax.
·tl· Tool number.
TOOL GEOMETRY.
(V.)TM.NUMOFDT[tl]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
Tool [tl]. Number of tool offsets.
Value. Meaning.
0 Without tool life monitoring.
1 Tool life monitoring; machining time.
2 Tool life monitoring; number of operations.
V.TM.TLFNT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.TLFRT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.TOTP1T[23] Tool ·23·. Custom parameter ·1·.
V.TM.TOTP2T[23] Tool ·23·. Custom parameter ·2·.
V.TM.TOTP3T[23] Tool ·23·. Custom parameter ·3·.
V.TM.TOTP4T[23] Tool ·23·. Custom parameter ·4·.