Fagor CNC 8060 - Page 824

·824·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with any tool.
Syntax.
·tl· Tool number.
(V.)TM.DTYPET[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Code of the tool offset type.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
Values of the variable.
This variable returns one of the following values.
(V.)TM.DSUBTYPET[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Code of the tool offset subtype.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
V.TM.NUMOFDT[23] Tool ·23·.
V.TM.DTYPET[23] Tool ·23·. Active tool offset.
V.TM.DTYPET[23][3] Tool ·23·. Tool offset ·3·.
Value. Meaning.
1 Milling tool..
2 Drilling tool.
3 Surface milling tool.
4 Reaming tool.
5 Boring tool.
6 Threading tool.
7 Grooving or cut-off tool.
8 Turning tool.
9 Other.
10 Measuring probe.
V.TM.DSUBTYPET[23] Tool ·23·. Active tool offset.
V.TM.DSUBTYPET[23][3] Tool ·23·. Tool offset ·3·.