Fagor CNC 8060 - Page 838

·838·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the tool being prepared.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].A.TOFLW.xn
Variable that can be read and written from the program.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
Tool being prepared. Tool length offset wear on the xn axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].G.TOFL1
(V.)[ch].G.TOFL2
(V.)[ch].G.TOFL3
Variable that can be read and written from the program.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
Tool being prepared. Tool length offset on the first axes of the channel.
On turning tools, it is used to define the tool length in each axis. On milling tools, it is used
to define the tool position when using a tool holder or an intermediate tooling.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOFLW1
(V.)[ch].G.TOFLW2
(V.)[ch].G.TOFLW3
Variable that can be read and written from the program.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
Tool being prepared. Tool length offset wear on the first axes of the channel.
Syntax.
·ch· Channel number.
V.A.TOFL.Z Z axis.
V.A.TOFL.4 Axis with logic number ·4·.
V.[2].A.TOFL.1 Axis with index ·1· in the channel ·2·.
V.A.TOFLW.Z Z axis.
V.A.TOFLW.4 Axis with logic number ·4·.
V.[2].A.TOFLW.1 Axis with index ·1· in the channel ·2·.
V.[2].G.TOFL 1 Channel ·2·. First axis of the channel.
V.[2].G.TOFL 2 Channel ·2·. Second axis of the channel.
V.[2].G.TOFL 3 Channel ·2·. Third axis of the channel.
V.[2].G.TOFLW1 Channel ·2·. First axis of the channel.
V.[2].G.TOFLW2 Channel ·2·. Second axis of the channel.
V.[2].G.TOFLW3 Channel ·2·. Third axis of the channel.