Fagor CNC 8060 - Page 858

·858·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the programmed functions.
HSC FUNCTION.
(V.)[ch].G.HSC
Variable that can be read from the program.
The variable returns the value of block preparation.
HSC function active.
Syntax.
·ch· Channel number.
ACTIVE PROBE.
(V.)[ch].G.ACTIVPROBE
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of the active probe.
Syntax.
·ch· Channel number.
STATUS OF THE LOCAL PROBES.
(V.)G.PRBST1
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of probe ·1·.
Values of the variable.
This variable returns one of the following values.
(V.)G.PRBST2
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of probe ·2·.
Values of the variable.
This variable returns one of the following values.
V.[2].G.HSC Channel ·2·.
V.[2].G.ACTIVPROBE Channel ·2·.
V.G.PRBST1
Value. Meaning.
0 The probe is not making contact or has not been initialized.
1 The probe is making contact.
V.G.PRBST2
Value. Meaning.
0 The probe is not making contact or has not been initialized.
1 The probe is making contact.