Fagor CNC 8060 - Page 861

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·861·
Variables related to the programmed functions.
(V.)[ch].G.PLMEAS1
(V.)[ch].G.PLMEAS2
(V.)[ch].G.PLMEAS3
Variable that can be read from the program.
The variable returns the value of block preparation.
Value measured on the first axes of the channel. Part coordinates of the tool tip.
Syntax.
·ch· Channel number.
(V.)[ch].A.MEASOF.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Difference with respect to programmed point.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.MEASIN.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Coordinate that includes a measurement offset.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.ATIPMEAS.4 Axis or spindle with logic number ·4·.
V.[2].A.ATIPMEAS.1 Axis with index ·1· in the channel ·2·.
V.SP.ATIPMEAS.2 Spindle with index ·2· in the system.
V.[2].SP.ATIPMEAS.1 Spindle with index ·1· in the channel ·2·.
V.[2].G.PLMEAS1 Channel ·2·. First axis of the channel.
V.[2].G.PLMEAS2 Channel ·2·. Second axis of the channel.
V.[2].G.PLMEAS3 Channel ·2·. Third axis of the channel.
V.A.MEASOF.Z Z axis.
V.A.MEASOF.S Spindle S.
V.SP.MEASOF.S Spindle S.
V.SP.MEASOF Master spindle.
V.A.MEASOF.4 Axis or spindle with logic number ·4·.
V.[2].A.MEASOF.1 Axis with index ·1· in the channel ·2·.
V.SP.MEASOF.2 Spindle with index ·2· in the system.
V.[2].SP.MEASOF.1 Spindle with index ·1· in the channel ·2·.
V.A.MEASIN.Z Z axis.
V.A.MEASIN.S Spindle S.
V.SP.MEASIN.S Spindle S.
V.SP.MEASIN Master spindle.
V.A.MEASIN.4 Axis or spindle with logic number ·4·.