Fagor CNC 8060 - Page 862

·862·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the programmed functions.
Remarks.
The CNC only refreshes this variable when probing with G101.
MANUAL INTERVENTION.
(V.)[ch].A.MANOF.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Distance moved in jog mode or tool inspection.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].A.ADDMANOF.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Distance moved with G200 or G201.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
Remarks.
The value of this variable is maintained during the execution of the program even when
canceling manual intervention.
STATUS OF THE ANGULAR TRANSFORMATION.
(V.)[ch].G.ANGAXST
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Overall status of the angular transformation of the channel.
Syntax.
·ch· Channel number.
V.[2].A.MEASIN.1 Axis with index ·1· in the channel ·2·.
V.SP.MEASIN.2 Spindle with index ·2· in the system.
V.[2].SP.MEASIN.1 Spindle with index ·1· in the channel ·2·.
V.A.MANOF.Z Z axis.
V.A.MANOF.4 Axis with logic number ·4·.
V.[2].A.MANOF.1 Axis with index ·1· in the channel ·2·.
V.A.ADDMANOF.Z Z axis.
V.A.ADDMANOF.4 Axis with logic number ·4·.
V.[2].A.ADDMANOF.1 Axis with index ·1· in the channel ·2·.
V.[2].G.ANGAXST Channel ·2·.