Fagor CNC 8060 - Page 864

·864·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the programmed functions.
(V.)[ch].A.TGCTRLST.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
Status of tangential control in the axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].A.TANGAN.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Angle programmed on the axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].G.TANGFEED
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Positioning feedrate for tangential control.
Syntax.
·ch· Channel number.
SYNCHRONIZATION OF CHANNELS.
(V.)[ch].G.MEETST[mk]
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of the MEET type mark [mk] in the [ch] channel.
Syntax.
·ch· Channel number.
V.A.TGCTRLST.Z Z axis.
V.A.TGCTRLST.4 Axis with logic number ·4·.
V.[2].A.TGCTRLST.1 Axis with index ·1· in the channel ·2·.
Value. Meaning.
0Off.
1On.
2 Frozen (suspended).
V.A.TANGAN.Z Z axis.
V.A.TANGAN.4 Axis with logic number ·4·.
V.[2].A.TANGAN.1 Axis with index ·1· in the channel ·2·.
V.[2].G.TANGFEED Channel ·2·.