Fagor CNC 8060 - Page 869

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·869·
Variables related to the programmed functions.
Remarks.
The reading from the PLC will be given in tenths (x10); i.e. if the parameter value is ·10·, the
PLC reading will return a value of ·100·.
(V.)[ch].A.ACFGAIN.xn
(V.)[ch].A.ACFGAIN.sn
(V.)[ch].SP.ACFGAIN.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Active percentage of AC-forward.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Remarks.
The reading from the PLC will be given in tenths (x10); i.e. if the parameter value is ·10·, the
PLC reading will return a value of ·100·.
(V.)[ch].A.ACTFFW.xn
(V.)[ch].A.ACTFFW.sn
(V.)[ch].SP.ACTFFW.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Instant feed-forward.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.FFGAIN.4 Axis or spindle with logic number ·4·.
V.[2].A.FFGAIN.1 Axis with index ·1· in the channel ·2·.
V.SP.FFGAIN.2 Spindle with index ·2· in the system.
V.[2].SP.FFGAIN.1 Spindle with index ·1· in the channel ·2·.
V.A.ACFGAIN.Z Z axis.
V.A.ACFGAIN.S Spindle S.
V.SP.ACFGAIN.S Spindle S.
V.SP.ACFGAIN Master spindle.
V.A.ACFGAIN.4 Axis or spindle with logic number ·4·.
V.[2].A.ACFGAIN.1 Axis with index ·1· in the channel ·2·.
V.SP.ACFGAIN.2 Spindle with index ·2· in the system.
V.[2].SP.ACFGAIN.1 Spindle with index ·1· in the channel ·2·.
V.A.ACTFFW.Z Z axis.
V.A.ACTFFW.S Spindle S.
V.SP.ACTFFW.S Spindle S.
V.SP.ACTFFW Master spindle.
V.A.ACTFFW.4 Axis or spindle with logic number ·4·.