Fagor CNC 8060 - Page 868

·868·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the programmed functions.
(V.)[ch].G.CSMAT8
(V.)[ch].G.CSMAT9
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Die resulting from the inclined plane.
These variables correspond to the transformation matrix from theoretical reference system
to the real reference system.
Syntax.
·ch· Channel number.
(V.)[ch].G.CSMAT10
(V.)[ch].G.CSMAT11
(V.)[ch].G.CSMAT12
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Offset of the current coordinate system referred to machine zero on the first axes.
These variables correspond to the transformation matrix from theoretical reference system
to the real reference system.
Syntax.
·ch· Channel number.
FEED-FORWARD AND AC-FORWARD.
(V.)[ch].A.FFGAIN.xn
(V.)[ch].A.FFGAIN.sn
(V.)[ch].SP.FFGAIN.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Active percentage of feed-forward.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].G.CSMAT1 Channel ·2·. Element row 1 column 1.
(V.)[ch].G.CSMAT2 Channel ·2·. Element row 1 column 2.
(V.)[ch].G.CSMAT3 Channel ·2·. Element row 1 column 3.
(V.)[ch].G.CSMAT4 Channel ·2·. Element row 2 column 1.
(V.)[ch].G.CSMAT5 Channel ·2·. Element row 2 column 2.
(V.)[ch].G.CSMAT6 Channel ·2·. Element row 2 column 3.
(V.)[ch].G.CSMAT7 Channel ·2·. Element row 3 column 1.
(V.)[ch].G.CSMAT8 Channel ·2·. Element row 3 column 2.
(V.)[ch].G.CSMAT9 Channel ·2·. Element row 3 column 3.
(V.)[ch].G.CSMAT10 Channel ·2·. Offset on the first axis.
(V.)[ch].G.CSMAT11 Channel ·2·. Offset on the second axis.
(V.)[ch].G.CSMAT12 Channel ·2·. Offset on the third axis.
V.A.FFGAIN.Z Z axis.
V.A.FFGAIN.S Spindle S.
V.SP.FFGAIN.S Spindle S.
V.SP.FFGAIN Master spindle.